SBC  CHEVY STREET/STRIP SBC KIT
1650.00 ON SALE NOW!
100.00 SHIPPING
THE SHOW AND GO RETRO ROLLER KIT
This is a complete top end kit for 305  327 350 383 400 SBC engines from 1968 to 1995
PAIR OF STRIKE FORCE SBC ALUMINUM HEADS STRAIGHT OR ANGLED PLUG
200 CC PORT VOLUME 64 CC  BRONZE VALVE GUIDES
SET UP FOR .600  ROLLER LIFT
2.02 AND 1.600 STAINLESS 1 PIECE RACE SERIES VALVES   .100 LENGTH
CHROME MOLY RETAINERS AND KEEPERS
ERSON  RACE SPRINGS 1.460
7/16   19000 SCREW IN STUDS AND GUIDE PLATES
POSITIVE VALVE STEM SEALS
PBM HEAD BOLT KIT
ARP INTAKE BOLT KIT
1205 ERSON INTAKE GASKETS
PROFESSIONAL PRODUCTS  CROSS WINDS   INTAKE MANIFOLD {POLISHED } 100.00 MORE
DUAL ROW  ADJUSTABLE TIMING SET
SET OF PBM  RETRO ROLLER  LIFTERS
5/16 CHROME MOLY PUSH RODS .080 WALL
FULL PBM CORTECO GASKET SET
CHROME VALVE COVERS
PBM  ROLLERCAM LOCK KIT
1.5 ERSON FORGED  ALUMINUM  ROLLER ROCKER ARMS FULL NEEDLE BEARINGS  WITH POLY
LOCKS  1.6 ROCKERS ADD 60.00
MECHANICAL AND OVAL TRACK TOP END KITS ADVAILABLE
Your name:
Your email address:
Your phone number:
Comments:
OEM BLOCK ROLLER KIT 1900.00
Approved by The Inl. Motor Contest Association.
WISSOTA
Approved for use by The Amsoil Dirt Track Series.

Material: High density cast iron
Valve Seats: Intake (integral), exhaust (hardened)
Valve Guides: Integral cast iron
Spring Seats: Machined for 1.560" and 1.250"
Valves: Manley stainless steel valves in assemblies (inconel exhaust valves on marine applications)
Valve Diameter: 2.020"" intake, 1.600" exhaust (11/32" stem)
Guide Plates: Stock
Rocker Arm Studs: Screw-in style
Rocker Arms: 1.5 ratio (use of 1.6 ratio will require elongation of pushrod holes)
Intake Runner: 200cc, standard port location
Exhaust Ports: 69cc, standard location
Combustion Chamber: 64cc or 72cc, straight or angled plug orientation
Spark Plug: 14mm 5/8" .460" reach tapered style
Valve Job: Multi-angle intake and radius exhaust
Valve Cover Rail: Raised w/ perimeter and center bolt pattern
Valve Angle: Stock 23°
Accessory Bolt Holes: Stock
50-State Emissions legal
Accepted by most oval tracks and sanctions as stock replacements. Check with rule book..
2 Assembled Heads: Solid Flat Tappet/Hydraulic Roller Cam
1.437": 125 lbs. @ 1.850", 340 lbs. @ 1.210", coil bind @ 1.160", max lift @ .600"
COMPETITION SERIES VALVES  2.02 AND 1.600
CAM SHAFT ERSON MECHANICAL FLAT TAPPET 230/230    542 542  LIFT  106 LOBE
MORE CANS TO CHOOSE

PBM LIFTERS
ERSON ALUMINUM ROLLER ROCKERS
PROFFESIONAL PRODUCTS HURRICANE MANIFOLD ..YOU CAN ADD CROSSWIND AT NO EXTRA
CHARGE
PBM RACE SERIES PUSHRODS
PBM DUAL ROW PERFORMANCE TIMING CHAIN
PBM HEAD BOLTS
ARP INTAKE BOLTS
FELPRO FULL SET OF GASKETS
MR.GASKET 1205 INTAKE GASKETS
CHROME VALVE COVERS
DESIGNED FOR RELIABILTY AND TO WIN RACES
WORLD PRODUCTS RACE TOP END
1850.00
ERSON/PBM aluminum heads 
PORTMATCHED to a FELPRO 1205 gasket 
Straight plug or Angle plug
200cc intake runner
64cc chambers with improved flow chambers
Stronger Pressure casted Aircraft grade 356A aluminum alloy heat treated to T6 specs
Harden valve seats
Bronze valve guides
Accepts center bolt and rail type valve covers
Standard accessory bolt holes
Plus .400 thick deck for severe uses
2.02 ERSON 1 piece intake valves
1.600 ERSON 1 piece exhaust valves
Valves are one piece forging EV-8 stainless steel alloy
Undercut stems powerflow design for improved flow
Fully machined and swirl polished stems
ERSON race series springs 135#@ 1.900 .550 lift 
ERSON /PBM chrome moly retainers And stamped steel retainers for long life
ERSON/PBM 7/16 screw in studs and matching  guide plates 
Positive viton valve seals for superb oil control 
ERSON/PBM .065 wall steel pushrods 7.900 that are hardend and guide plate compatible 
1205 FELPRO intake gaskets that the heads are port matched by us 
Free port-match 
ALUMINUM INTAKE MANIFOLD (included) dual plane 1500-6500 rpm
(air gap )intake manifold designed to cool the fuel and intake air for better combustion dual plane add 60.00
1500-6500 rpm range  
HURRICANE single plain intake manifold 3000-7000 rpm range add 60.00 dollars 
ERSON /PBM performance timing chain
Timing chain had been heat treated and pre stretched for long accuracy 
Adjustable +or- 4 degree to Dial in power band of 
ERSON /PBM set of performance head bolts  
ARP intake bolts 
FELPRO gasket set 
Chrome valve covers for a nice look 
Erson performance cam shaft 
230/230 duration at .050 
.480 .480 lift of cam 
110 lobe  center for fair idle qualities 
Rpm range of cam is 1500 to 6500 
Other cam available for kit  
ERSON /PBM  cam lock kit
ERSON/PBM  1.5 ratio 7/16 performance aluminum rocker arms with full needle bearings for long life 
1.6 ratio add 50.00
E110008 IDLE-5000 194°IN/ 204°EX .398"IN/.420"EX 104° 
E110014 IDLE-5200 204°IN/ 214°EX .420"IN/.443"EX 110° 
E110024 1000-5500 214°IN/ 214°EX .443"IN/.443"EX 112° 
E110026 1000-5500 214°IN/ 224°EX .443"IN/.465"EX 112° 
E110032 1500-6200 225°IN/ 281°EX .480"IN/.480"EX 108° 
E110034 1500-6000 222°IN/ 222°EX .447"IN/.447"EX 114° 
E1100361500-6200 224°IN/ 224°EX .450"IN/.460"EX 114° 
E110038 1500-6200 224°IN/ 224°EX .465"IN/.465"EX 112° 
E110040 1800-6500 224°IN/ 234°EX .465"IN/.488"EX 112°
E110042 1800-6200 230°IN/ 230°EX .453"IN/.453"EX 112° 
E110044 1800-6200 230°IN/ 230°EX .480"IN/.480"EX 108°

110052 1800 - 6400 230/230 .510.510 108 lobe my favorite 
Question ? Shop 765-537-9900

RETRO ROLLER KIT  2100.00